The pipe bending machine is gradually becoming more and more widely used in our daily life. Many people are using this machine for the first time, and may not have a deep understanding of this machine. Perhaps they only know that this machine can bend and deform pipes to achieve the desired shape, so there are many places where they are not so formal when using it, So they need to understand some basic knowledge in order to use the pipe bending machine correctly.
Pipe bending machine
When using the pipe bending machine, we need to make adjustments, which can be manually adjusted or adjusted using some machines. This adjustment is for stroke adjustment. When adjusting the stroke, we should try it out, that is, when the machine bends the pipe, it needs to be adjusted. When the machine is working from top to bottom, it is necessary to reserve a certain space at the lowest part, which can protect the machine and mold from being damaged. And when the machine is working, it is necessary to set up warning signs around the machine, because there should be no very annoying people around the machine during operation, as it is likely to harm others.
The control panel of the pipe bending machine requires a key to open it when it is turned on or off. Because this control panel is an important device, ordinary people cannot touch it casually. Due to careless touching, some of the already adjusted programs of the machine may be destroyed while working. When using the machine, we first need to turn on the power supply and then turn on the oil pump. However, the pipe bending machine does not start working immediately at this time, it needs to wait for the oil pump to rotate for a while before starting working. At this time, we can also check if there are any other abnormalities in the machine.
