How to use pipe bending machine tube bender reasonably

The pipe bending machine is a new type of bender with the function of bending and the function of the top. It has many advantages such as reasonable structure, safe operation, convenient operation, reasonable price, fast loading and unloading, multi-purpose machine, etc. It has a large proportion in the domestic hydraulic pipe bending machine market, mainly used in factories, warehouses, docks, construction, railways, cars. Wait for device pipes and patching. In addition to the function of the elbow, it can also be used as a separate hydraulic hoist.

Then, the tube bender that is purchased back should pay attention to the following conditions when using it:

1. Before operation, please check whether the smooth points of the machine are short of oil, whether the safety protection equipment is secure, whether the movement mechanism is loose, etc.

2. Start the elbow oil pump and check whether the system pressure is within the regular range. If it is high, it will damage the hydraulic components and spoil the power supply. If it is too low, it will affect the operation.

3. Adjust the required orientation and required angle of the part and position the part to the required length.

4. Adjust the vertical lifting rail so that the guiding mold pressing cylinder can clamp the tight iron pipe.

5. The clamp clamping cylinder can clamp the pipe fittings.

6. Normal operation Put the workpiece into the zigzag mold, and the front end touches the positioning, and the foot switch is pressed to complete the knot.

7. After the operation is completed, cut off the power supply and do a clean and smooth operation.

8. If the operation of the bending machine is in an emergency, press the emergency stop button, then turn the rotary switch to the manual position, and manually reset it. If something goes wrong, please report it in time.